OPTIONS AVAILABLE:
ST:712 SPUD WELLS
12" diameter spud wells
ST:10" SPUDS
20'ers, and 40'ers
ST:718 SPUD WELLS
18" diameter spud wells
ST:16" SPUDS
20', 40', 50', and 60'
ST:724 SPUD WELLS
24" diameter spud wells
ST:22" SPUDS
20', up to 80'
ST:1012 RAMP
10' Wide by 12' Long
ST:1016 RAMP
10' Wide by 16' Long
ST:05 LADDERS
ST:05 TOW BITTS
ST:05 HAND RAILS
ST:05 12"x6" ZINC'S
ST:05 PAINTED PINS
ANTIFOULANT BOTTOM PAINT RED OR BLUE
SHAKERTON
CNTR: SERIES SECTIONAL BARGES
ALL SECTIONS FIT INSIDE ISO SHIPPING CONTAINERS
Standard Specifications:
All 1/4" A-36 steel plate hull with solid one piece tops, bottoms, sides, and ends.
That's right!! PREMIUM one piece tops and bottoms.
" DOUBLE STACK " CNTR: SECTIONS
3"x3"x1/4" angle transverse truss frames spaced 18" apart.
" HEAVY DUTY " CNTR: SECTIONS
5"x3"x1/4" angle transverse truss frames spaced 18" apart.
The connector angles are 6" x 4" x 5/8" welded solid to the hull.
Connector holes are 1.75" dia. spaced 24" O.C. around the entire section.
All holes are drilled not punched, nor burnt with a torch.
The hull is welded solid inside with hard wire mig and the framing is skip welded.
The outer hull is welded with 70-24 5/32nd jet rod and all vertical corners are welded with 70-18 1/8th vertical up hill.
Each SHAKERTON Section is air tested to 5 lbs. psi.
The outer hull is sand blasted and coated with Bar Rust 235 in Haze Gray.
All Sections come with 1-18" flush mounted access hatch, and
all 1.5" double headed connector pins needed.
" DOUBLE STACK " CNTR: SECTIONS
CNTR: SERIES Size Weight Empty Draft Deck Loads
These max deck loads are with 12" of free board per section.
These max deck loads are with 12" of free board per section.