J&J BOATWORKS,INC.

HD:SERIES










OPTIONS AVAILABLE:



HD:918 SPUD WELLS
18" diameter spud wells 
ST:16" SPUDS
20', 40', 50', and 60'



HD:924 SPUD WELLS
24" diameter spud wells
ST:22" SPUDS
20', up to 80'




HD:1216 RAMP
12' Wide by 16' Long
HD:1220 RAMP
12' Wide by 20' Long



HD:07  LADDERS
HD:07 TOW BITTS
HD:07 HAND RAILS
HD:07 12" ZINC'S
HD:07
PAINTED PINS

ANTIFOULANT BOTTOM PAINT  RED OR BLUE





SHAKERTON
HD: SERIES SECTIONAL BARGES

Standard Specifications:
All 1/4" A-36 steel plate hull with solid one piece tops, bottoms, sides, and ends.
That's right!! PREMIUM 10' wide one piece tops and bottoms.

5"x3"x1/4" angle transverse truss frames spaced 18" apart.
The connector angles are 6" x 4" x 3/4" welded solid to the hull.
Connector holes are 1.75" dia. spaced 24" O.C. around the entire section.
All holes are drilled not punched, nor burnt with a torch.
The hull is welded solid inside with hard wire mig and the framing is skip welded. 
The outer hull is welded with 70-24 5/32nd jet rod and all vertical corners are welded with 70-18 1/8th vertical up hill.
Each SHAKERTON Section is air tested to 5 lbs. psi.
The outer hull is sand blasted and coated with Bar Rust 235 in Haze Gray.

All Sections come with 1-18" flush mounted access hatch, and
all 1.5" double  headed connector pins needed.

ST: SERIES    Size                 Weight      Empty Draft      Deck Loads

  • HD: 207     20' x 10' x 7'       16,500 lbs        16" Draft         26 Tons max
  • HD: 307     30' x 10' x 7'       24,000 lbs        16" Draft         39 Tons max
  • HD: 405     40' x 10' x 7'       30,125 lbs        16" Draft         52 Tons max    These max deck loads are with 12" of free board per section.
  •   
  • HDR: Rake sections available in the same lengths as standard sizes.
  • 2 - 20'ers PER TRUCK,  1- 30'er PER TRUCK , 1 - 40'er PER TRUCK    

 
        
       







Website Builder